Skip to main content

DDL709-FVP-7HWS Programming & Factory Reset

Updated over a month ago

Personalize Default Master PIN

  1. Press [*] twice, enter the default Master PIN (12345678), then press [#] to confirm.

  2. Enter a new Master PIN, then press [#].

  3. Re-enter the new Master PIN, then press [#].

Modify Master PIN Code

  1. Press [*] twice, enter the current Master PIN, then press [#] to confirm.

  2. Press [1] to enter User Settings.

  3. Press [5] to modify the Master PIN.

  4. Enter a new Master PIN, then press [#].

  5. Re-enter the new Master PIN, then press [#].

  6. Wait for the voice prompt “Succeeded.”

  7. Press [*] to return to the main menu.

Add or Change Master Fingerprint

  1. Press [*] twice, enter the current Master PIN, then press [#] to confirm.

  2. Press [1] to enter User Settings.

  3. Press [4] to add or change the Master fingerprint.

  • No existing Master fingerprint:

    • Enroll a fingerprint → it will be set as the Master fingerprint.

  • Existing Master fingerprint:

    • Enroll a new fingerprint → it will replace the existing one.

  1. Wait for the voice prompt “Succeeded.”

  2. Press [*] to return to the main menu.

Add User PIN Code

  1. Press [*] twice, enter the current Master PIN, then press [#] to confirm.

  2. Press [1] to enter User Settings.

  3. Press [1] to add a user.

  4. Enter a new User PIN, then press [#].

  5. Wait for the voice prompt “Succeeded.”

  6. Press [*] to return to the main menu.

Add User Fingerprint

  1. Press [*] twice, enter the current Master PIN, then press [#] to confirm.

  2. Press [1] to enter User Settings.

  3. Press [1] to add a user.

  4. Place your finger on the sensor and follow the voice prompts until enrollment is complete.

  5. Wait for “Succeeded.”

  6. Press [*] to return to the main menu.

Add User Key Tag

  1. Press [*] twice, enter the current Master PIN, then press [#] to confirm.

  2. Press [1] to enter User Settings.

  3. Press [1] to add a user.

  4. Place the Key Tag in front of the card reader.

  5. Wait for “Succeeded.”

  6. Press [*] to return to the main menu.

Add One-Time PIN Code

  1. Press [*] twice, enter the current Master PIN, then press [#] to confirm.

  2. Press [1] to enter User Settings.

  3. Press [2] to add a One-Time PIN.

  4. Enter a 6–12 digit One-Time PIN, then press [#].

  5. Wait for “Succeeded.”

  6. Press [*] to return to the main menu.

Add Face ID

  1. Press [*] twice, enter the current Master PIN, then press [#] to confirm.

  2. Press [1] to enter User Settings.

  3. Press [3] to add Face ID.

  4. Position your face in front of the camera and follow the voice prompts.

  5. Wait for “Succeeded.”

  6. Press [*] to return to the main menu.

Delete a User

  1. Press [*] twice, enter the current Master PIN, then press [#] to confirm.

  2. Press [1] to enter User Settings.

  3. Press [6] to delete user information.

Select deletion option:

  • [1] PIN code

  • [2] Fingerprint

  • [3] Key Tag

  • [4] Face ID

  • [5] All users

  • For Specific access methods that needs to be deleted, follow the voice prompts.

  • Wait for the “Succeeded” voice prompt

  • Press [*] to return to the main menu.

How to Perform a Factory Reset

Did this answer your question?