Skip to main content

DDL709-FVP-7HWS Alert Types (Outside Forced Lock Alert | Low Battery Alert | Anti-Dismantling Alert | Deadbolt Abnormality Alert | Motion Detection [Loitering] Alert)

Updated over 3 weeks ago

Outside Forced Lock Alert

Triggering:

  • When the lock is in Outside Forced Lock mode, unlocking the door from inside will trigger the alert.

Alert Mode:

  • Continuously repeated alert.

Alert Off:

  • The alert will stop after any successful access verification.


Low Battery Alert

Triggering:

  • Battery voltage is automatically checked each time the system wakes up.

  • If the battery level is low, an alert will be triggered.

Alert Mode:

  • Voice prompt during unlocking: “Low battery, please replace the battery.”

Alert Off:

  • The alert will turn off automatically.

Battery Life:

Up to 3 months (rechargeable lithium battery). Actual battery life may vary depending on usage scenarios and feature settings.


Anti-Dismantling Alert

Triggering Condition 1 - The door is pried open ,and the sensor latch bolt is triggered.

Alert Mode:

  • Continuously repeated alert.

Alert Off:

  • Automatically stops, or

  • Stops after successful access verification.


Triggering Condition 2 - The outside escutcheon is pried open and no longer fits properly against the door.

Alert Mode:

  • Continuously repeated alert.

Alert Off:

  • Automatically stops, or

  • Stops after successful access verification, or

  • Stops after unlocking from inside.


Deadbolt Abnormality Alert

Triggering:

  • The deadbolt operates abnormally, and the door fails to lock or unlock.

Alert Mode:

  • Continuously repeated alert.

Alert Off:

  • The alert will turn off automatically.


Motion Detection (Loitering) Alert

Triggering:

  • When a person remains in front of the door longer than the set duration, the loitering alert will be triggered.

Alert Mode:

  • The camera captures a video and sends a notification to the app.

Alert Off:

  • Motion detection is disabled by default.

  • This feature can be enabled or disabled in the app.


Important Notes

  1. Motion detection is OFF by default. To enable it:

    • Log in to the app

    • Bind the door lock on the Home page

    • Go to Settings and enable Loitering Alert

  2. Frequent video recording increases battery consumption.

    • To reduce power usage, set Motion Detection Sensitivity to Low.


Did this answer your question?