How to Adjust the Handle Orientation
Outside Panel
Loosen the screw securing the handle.
Rotate the lever 180° to the correct position and secure the screw.
Align the square shaft: Rotate the square shaft hole so that the triangular mark on the square shaft hole points in the same direction as the lever.
Inside Panel
Loosen the screw securing the handle.
Rotate the lever 180° to the correct position.
Secure the screw back in place.
Notes
Choose the proper installation kit based on door thickness:
Default toolkit: 35–60 mm doors
For other door thicknesses, consult your local distributor.
If the square shaft is too long, cut it to the proper length according to the door thickness before installation.