Skip to main content

DDL702-1HWS Programming & Factory Reset

Updated over 3 weeks ago


​
​

How to change the master PIN code

  1. Press [#] Enter Master PIN code, then press [#] to confirm

  2. Press [1]

  3. Enter new master PIN code

  4. Press [#] to confirm

  5. Re-Enter new master PIN code

  6. Press [#] to confirm

  7. wait for the voice prompt "Succeeded."

  8. Press [*] several times to exit

How to add a user PIN code

  1. Press [#] Enter Master PIN code, then press [#] to confirm

  2. Press [2] Registration mode

  3. Press [1]

  4. Enter user PIN code 6-12 digits

  5. Press [#] to confirm

  6. Re-enter user PIN code

  7. Press [#] to confirm

  8. wait for the voice prompt "Succeeded"

  9. Press [*] several times to exit

How to add a one-time user PIN code

  1. Press [#] Enter Master PIN code, then press [#] to confirm

  2. Press [2] Registration mode

  3. Press [2]

  4. Enter one-time PIN code 6-12 digits

  5. Press [#] to confirm

  6. Re-enter one-time PIN code

  7. Press [#] to confirm

  8. wait for the voice prompt "Succeeded"

  9. Press [*] several times to exit

How to add a Fingerprint

  1. Press [#] Enter Master PIN code, then press [#] to confirm

  2. Press [2] Registration mode

  3. Press [3]

  4. Place a finger against the sensor

  5. After hearing the voice prompt* “Move your finger and put it on again.”

  6. Remove and re-place finger against the sensor.

  7. Repeat the process until you hear a voice prompt "Succeeded.”

  8. Press [*] several times to exit.

How to delete a user PIN code

  1. Press [#] Enter Master PIN code, then press [#] to confirm

  2. Press [3] Deletion mode

  3. Press [1]

  4. Press [1]

  5. Enter the 2-digit [user number] (00-09) of the user PIN code that is to be deleted

  6. Press [#]to confirm

  7. Wait for the voice prompt "Succeeded."

  8. Press [*] several times to exit

How to delete all user PIN codes

  1. Press [#] Enter Master PIN code, then press [#] to confirm

  2. Press [3] Deletion mode

  3. Press [1]

  4. Press [2] To Delete all user PIN codes

  5. Wait for the voice prompt "Succeeded."

  6. Press [*] several times to exit

How to delete a one-time user PIN code

  1. Press [#] Enter Master PIN code, then press [#] to confirm

  2. Press [3] Deletion mode

  3. Press [2]

  4. Press [1]

  5. Wait for the voice prompt "Succeeded"

  6. Press [*] several times to exit

How to delete a fingerprint

  1. Press [#] Enter Master PIN code, then press [#] to confirm

  2. Press [3] Deletion mode

  3. Press [3]

  4. Press [1]

  5. Enter the 2-digit [user number] (00-09) of the fingerprint that is to be deleted

  6. Press [#]to confirm

  7. Wait for the voice prompt "Succeeded"

  8. Press [*] several times to exit

How to delete all fingerprints

  1. Press [#] Enter Master PIN code, then press [#] to confirm

  2. Press [3] Deletion mode

  3. Press [3]

  4. Press [2]

  5. Wait for the voice prompt "Succeeded"

  6. Press [*] several times to exit
    ​

How to perform a factory reset

  1. Remove the inside upper cover

  2. Double-click the [RES] button with a sharp object

  3. Until you hear a voice prompt “Restored to factory settings.”

All user information will be emptied.

Did this answer your question?