Skip to main content

DDL702-8HWS Unlocking Methods (Outside and Inside)

Updated over 3 weeks ago

šŸ”“ Unlock from Outside

  • PIN Code (Master PIN: 1 | User PIN: 20 | One-Time PIN: 1)

Steps:

  • Touch the digit input area to light up the keypad.

  • Enter the registered PIN and press [#].

  • After the voice prompt ā€œDoor openedā€, push or pull the door to unlock.

  • Fingerprint - Up to 100

Steps:

  • Place the registered finger on the fingerprint sensor.

  • After the voice prompt ā€œDoor openedā€, push or pull the handle to unlock.

  • Face Recognition - Up to 20

  1. Position the registered face in front of the camera.

  2. After the voice prompt ā€œDoor openedā€, push or pull the handle to unlock.

  • Mechanical Key

    Steps:

    1. Cut open the mechanical key box and remove the key. Push the cover aside to reveal the key.

    2. Insert the key into the keyhole, keeping the key vertical to the key shell. Rotate the key shell 90° toward the handle until it is close to the lock.

    3. Rotate the key shell 180° clockwise until it is parallel to the ground, then rotate it horizontally toward the handle to unlock.

    ⚠ Attention:
    It is recommended not to use the mechanical key for daily unlocking. Use it only in emergencies, such as:

    • Battery is depleted

    • PIN code is forgotten

    • System malfunction


šŸ” Unlock from Inside

  • Knob: Rotate the rotary knob to unlock.

  • Button: Double-press the [OPEN] button within 1 second, then push or pull the door to unlock.

  • Infrared Sensor:

    • When the infrared sensor is triggered, press the sensor modules on both the front and rear sides of the handle simultaneously to unlock.

Did this answer your question?