Installation Requirements:
Door Thickness: 35-50 mm | 50-90mm
Lock Stile: 90 mm
Backset: 45-50 mm
Lock Dimension:
Pass the connecting cables of the exterior assembly through the door hole
Secure the mounting plate with screws.
Insert the connecting cables of the exterior assembly into the interior assembly
⚠️Attention: Be sure to hide any extra connecting cables within the door hole.
Install the interior assembly and secure it with screws.
Install the strike plate and secure it with screws
⚠️ Attention: After installation completed, please check if all components are properly connected and assembled in good condition.