Installation Requirements:
Door thickness: 35-50 mm
Lock stile: 180 mm
Backset: 50 mm
Lock Dimension:
⚠️ Note: The following assembly instructions are for right-hand swing doors. For left-hand swing doors, please invert the interior assembly for installation. Use the appropriate installation method for the strike plate according to the actual door swing direction.
Pass the front assembly cable through the door hole.
Secure the mounting plate with screws. (Be careful not to break the assembly cable)
Connect the exterior assembly cable to the interior assembly.
Install the interior assembly and secure it with screws.
Select appropriate strike shims and secure the strike cover.
Insert batteries and fasten the cover.
