Assembly Instructions (Right-Hand Swing Doors)
Note: For left-hand swing doors, read the [Notice Before Assembling] and adjust the latch direction first.
Step 1: Prepare the Door
Drill holes in the door according to the drilling template.
Mount the mortise into the jamb and secure with screws.
Step 2: Prepare the Exterior Assembly
Install the M6 screw sleeves onto the exterior assembly.
Insert the square shaft into the square shaft housing.
Align the small holes on the square shaft with the holes in the housing.
Insert the split pin and bend both ends to secure the square shaft.
Step 3: Install the Exterior Assembly
Pass the assembly cables through the door hole.
Align the exterior assembly so it fits closely against the door.
Step 4: Connect the Interior Assembly
Insert the assembly cables into the interior assembly.
Secure the cables in the cable slot.
Step 5: Attach the Interior Assembly
Attach the interior assembly to the door.
Secure it using M6 anchor screws.
Step 6: Install Batteries
Install alkaline batteries following the polarity guide.
Cover with the battery cover and silicone plug
