MASTER PIN Programming
(After activation or factory reset / Changing from default Master PIN)
Tap the screen to illuminate it without entering any numbers.
Press [*] twice, enter the default Master PIN, then Press [#] to confirm
Note:
The default Master PIN is 12345678.
If the Master PIN is still set to the default, you must change it in Master Mode before performing any other operations.
Add or Modify the MASTER PIN
Tap the screen to activate it (do not enter any numbers).
Press [*] twice, enter the current Master PIN, then press [#] to confirm.
Press [1] to enter Settings.
Press [5] to modify the Master PIN.
Enter a new Master PIN, then press [#] to confirm.
Re-enter the new Master PIN and press [#] again.
After hearing the successful setting prompt, press [*] to return to the previous menu until exiting Master Mode.
MASTER FINGERPRINT Programming
(After activation or factory reset)
Tap the screen to illuminate it (do not enter any numbers).
Press [*] twice.
Place the enrolled finger on the fingerprint sensor to enter Master Mode.
Notes
The lock does not have a Master Fingerprint by default. You must enroll one before use.
The Master Fingerprint must not be the same as any user fingerprint.
Add or Modify a MASTER FINGERPRINT
Tap the screen to activate it (do not enter any numbers).
Press [*] twice, enter the current Master PIN, then press [#] to confirm.
Press [1] to enter Settings.
Press [4] to add or modify the Master Fingerprint.
Behavior
No Master Fingerprint Set:
Enroll a fingerprint. It will automatically become the Master Fingerprint.
Master Fingerprint Already Set:
Enroll a new fingerprint to replace the existing Master Fingerprint.
After hearing the successful prompt, press [*] to return to the previous menu until exiting Master Mode.
Add a USER PIN
Tap the screen to activate it (do not enter any numbers).
Press [*] twice, enter the current Master PIN, then press [#] to confirm.
Press [1] to enter Settings.
Press [1] to add a user.
Enter the new User PIN, then press [#] to confirm.
Re-enter the User PIN and press [#] again.
After the successful prompt, press [*] to return to the previous menu until exiting Master Mode.
Add a USER FINGERPRINT
Tap the screen to activate it (do not enter any numbers).
Press [*] twice, enter the current Master PIN, then press [#] to confirm.
Press [1] to enter Settings.
Press [1] to add a user.
Place your finger on the fingerprint sensor.
When prompted to “Please remove your finger and try again,” lift and re-place your finger.
Repeat several times until enrollment is complete.
After hearing the successful addition prompt, press [*] to return to the previous menu until exiting Master Mode.
Add a KEY TAG
Tap the screen to activate it (do not enter any numbers).
Press [*] twice, enter the current Master PIN, then press [#] to confirm.
Press [1] to enter Settings.
Press [1] to add a user.
Hold the key tag in front of the key tag sensor.
After the successful addition prompt, press [*] to return to the previous menu until exiting Master Mode.
Delete a USER (PIN / Fingerprint / Key Tag)
Tap the screen to activate it (do not enter any numbers).
Press [*] twice, enter the current Master PIN, then press [#] to confirm.
Press [1] to enter Settings.
Press [6] to delete a user.
Select the access method to delete:
[1] Delete PIN code
[2] Delete fingerprint
[3] Delete key tag
Follow the voice prompts to complete deletion.
After successful deletion, press [*] to return to the previous menu until exiting Master Mode.
Factory Reset
Function:
Deletes all user data and restores the lock to factory default settings.
How to Use:
Double-press the [RES] button using a sharp object.
All user information will be erased and default settings restored.