Skip to main content

Alpha VP-5HWS Programming & Factory Reset

Updated over 2 weeks ago

Changing master PIN from default/after activation/after factory reset

  1. Press [*] twice, enter the default Master PIN code 12345678, then press [#] to confirm

  2. Enter the new master PIN code and Press [#] to confirm.

  3. Enter again and press [#] to confirm.

How to change the master PIN code

  1. Press [*] twice, enter the default Master PIN - 12345678, then press [#] to confirm.

  2. Press [1] User settings

  3. Press [5] to change Master PIN

  4. Enter a new master PIN code and confirm with [#]

  5. Enter the new master PIN code again and confirm with [#].

  6. Wait for the voice prompt "Succeeded.”

  7. Press [*] several times to exit.

How to register a user PIN code

  1. Press [*] twice, enter the current Master PIN, then press [#] to confirm

  2. Press [1] User Settings

  3. Press [1]

  4. Enter the new User PIN code.

  5. Press [#]to confirm.

  6. Re-enter the new master PIN code

  7. Press [#]to confirm.

  8. wait for the voice prompt "Succeeded.”

  9. Press [*] several times to exit.
    ​

How to register a fingerprint

  1. Press [*] twice, enter the current Master PIN, then press [#] to confirm

  2. Press [1] User Settings

  3. Press [1]

  4. Place a finger against the sensor

  5. After hearing the voice prompt "Take away your finger and place it again."

  6. Remove and re-place finger against the sensor.

  7. Wait for the voice prompt "Succeeded.”

  8. Press [*] several times to exit.
    ​

How to register a key tag

  1. Press [*] twice, enter the current Master PIN, then press [#] to confirm

  2. Press [1] User Settings

  3. Press [1]

  4. Hold the key tag on the card reader until you hear a beep.

  5. wait for the voice prompt "Succeeded.”

  6. Press [*] several times to exit.

How to change or add a master Fingerprint

Diagram Description automatically generated

  1. Press [*] twice, enter the current Master PIN, then press [#] to confirm

  2. Press [1] User settings

  3. Press [4]

  4. Place your finger as a Master Fingerprint

  5. Wait for the voice prompt "Succeeded.”

  6. Press [*] several times to exit.

How to register a one-time PIN

  1. Press [*] twice, enter the current Master PIN, then press [#] to confirm

  2. Press [1] to go to User Settings

  3. Press [2] to add a one-time PIN

  4. Enter a one-time PIN code of 6 to 12 digits

  5. Press [#]to confirm

  6. Re-enter the one-time PIN

  7. Press [#]to confirm

  8. Once heard a voice prompt of “Succeeded", keep pressing [*] several times until you exit master mode.

Deletion of User Information:

  1. Press [*] twice, enter the current Master PIN, then press [#] to confirm

  2. Press [1] to go to User Settings

  3. Press [6] to delete user information

  4. Press the number that corresponds to the information that is to be deleted. Please follow the voice guide to delete specific information:

    1. Delete a single PIN code, press [1]

    2. Delete a single fingerprint, press [2]

    3. Delete a single Key tag, press [3]

    4. Delete a single PIN code, press [1]

    5. Delete a single fingerprint, press [2]

    6. Delete a single Key tag, press [3]

    7. Delete all user information, press [5]

  5. Once heard a voice prompt of "succeeded", keep pressing [*] until you finally exit master mode.

How to perform a factory reset: (Empty all user information and restore the EasyKey to default settings.)

How to use:

Double-click the [RES] button with a sharp object. Then the door lock will be restored to factory settings, and all the user information will be emptied.

Did this answer your question?