Skip to main content

DDL603E-5HWS Adjusting the Inside Handle Orientation

Updated over 2 weeks ago

  1. Unscrew two screws and remove the direction reversing stand.
    ​

    Diagram Description automatically generated

  2. Rotate the handle to 180 degrees for optimal placement.
    ​

    Diagram Description automatically generated

  3. Put the direction reversing stand back and tighten the screws.
    ​

    Engineering drawing Description automatically generated


    ​

    Caution:

    1. Please choose the proper installation kit to suit your door thickness. The default installation kit is applicable for a door thickness of 60-90mm. If your door thickness does not within this range, please feel free to contact us.

    2. The bar shall be cut to an optimal length as per the thickness of door.

Did this answer your question?